The adhesive we use is appropriate for a range of materials, even those which don't usually like to be adhered to, for example Polypropylene (commonly used in soft drink bottle caps for example).
Due to the huge amount of materials used in the manufacture of devices, cases and accessories, it is too difficult to list every material which the plate will adhere to.
--------------------------------------------------------------------
The universal iPhone M-Lock Adapter uses 3M 9448 adhesive.
3M 9448HK is double coated pressure sensitive adhesive tape. High adhesion acrylic pressure sensitive adhesive is coated on both sides of flexible non-woven film. High adhesion acrylic pressure sensitive adhesive has good bond strength on many types of substrate including low surface energy plastics on which most acrylic adhesive can not adhere well. Initial tack of this adhesive is not so effected by temperature change and good tack even at cold environment. Soft acrylic adhesive can penetrate rough surface and show good bonding. Paper liner is
chosen to provide high suitability to converting processes such as die cutting.
At least 2kg of pressure should be applied to the product when installed, for a minimum of 30 seconds to ensure strong bond. Allow the adhesive to bond properly over 12 hours before use.
Comments
0 comments
Article is closed for comments.